Agilent Technologies Signal Analyzer N9030a - Manual (Page 863)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Mode
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL SA
INST:NSEL 1
Initial S/W Revision Prior to A.02.00
EMI Receiver
The EMI Receiver Mode makes EMC measurements. Several measurements are provided to aid the
user in characterizing EMC performance of their systems, including looking at signals with
CISPR–16 compliant detectors, performing scans for interfering signals, and determining and
charting interfering signals over time.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL EMI
INST:NSEL 141
Initial S/W Revision A.07.01
IQ Analyzer (Basic)
The IQ Analyzer Mode makes general purpose frequency domain and time domain measurements.
These measurements often use alternate hardware signal paths when compared with a similar
measurement in the Signal Analysis Mode using the Swept SA measurement. These frequency
domain and time domain measurements can be used to output I/Q data results when measuring
complex modulated digital signals.
If you are using the Help feature, this mode must be currently active to access its detailed
information. If it is not active, exit the Help feature (Esc key), select the mode, and re-access
Help.
Key Path Mode
Example INST:SEL BASIC
Remote Language Compatibility Measurement Application Reference 863