Agilent Technologies Signal Analyzer N9030a - Manual (Page 190)

4 List of Legacy Analyzer Commands
Alphanumeric List of all Legacy Commands with N9061A Support
Command Description 8566 8568
8560
Series Description
HP8568: Inhibits phase lock
KSW Amplitude error correction
routine No No N/A
KSw Displays amplitude error
correction routine No No N/A
KSX Amplitude correction
factors on No No N/A
KSx Sets trigger mode to
external Yes Yes N/A "KSx (External Trigger)" on page 349
KSY Amplitude correction
factors off No No N/A
KSy Sets trigger mode to video Yes Yes N/A "KSy (Video Trigger)" on page 350
KSZ Reference level offset Yes Yes N/A "KSZ (Reference Level Offset)" on page 351
KSz Sets the display storage
address No No N/A
L0 Turns off the display line Yes Yes Yes "L0 [zero] (Display Line Off)" on page 352
LB Writes text label No No No
LCLVAR Defines a local variable for
use N/A N/A No
LF Preset 0-2.5GHz Yes N/A N/A "LF (Low Frequency Preset)" on page 353
LG Selects log scale Yes Yes Yes "LG (Logarithmic Scale)" on page 354
LIMD Delta amplitude value for
limit line segment N/A N/A Yes
LIMF Frequency value for limit-
line segment N/A N/A Yes "LIMF (Limit Line Frequency Value)" on page
355
LIMIDEL Erase contents of limit line
table N/A N/A N/A
LIMIDISP Controls when the limit
line(s) are displayed N/A N/A N/A
LIMIFAIL Limit line fail N/A N/A Yes "LIMIFAIL (Limits Failed)" on page 356
LIMIFT Select frequency or time
limit line N/A N/A N/A
LIMIHI Upper limit N/A N/A N/A
LIMILINE Limit line N/A N/A N/A
190 Remote Language Compatibility Measurement Application Reference