Agilent Technologies Signal Analyzer N9030a - Manual (Page 1438)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trigger
Key Path Trigger, Auto/Holdoff
Remote Command :TRIGger[:SEQuence]:HOLDoff <time>
:TRIGger[:SEQuence]:HOLDoff?
:TRIGger[:SEQuence]:HOLDoff:STATe OFF|ON|0|1
:TRIGger[:SEQuence]:HOLDoff:STATe?
Example TRIG:HOLD:STAT ON
TRIG:HOLD 100 ms
Dependencies Unavailable if the selected Input is BBIQ. If this is the case, the key is grayed out if it is pressed
the informational message “Feature not supported for this Input” is displayed. If the SCPI
command is sent, the error “Settings conflict; Feature not supported for this Input” is generated.
Preset Off, 100 ms
State Saved Saved in instrument state
Min 0 s
Max 0.5 s
Default Unit s
Initial S/W Revision Prior to A.02.00
1438 Remote Language Compatibility Measurement Application Reference