Agilent Technologies Signal Analyzer N9030a - Manual (Page 142)

3 Programming the Analyzer
STATus Subsystem
dependencies
Initial S/W Revision Prior to A.02.00
Operation Event Query
This query returns the decimal value of the sum of the bits in the Operation Event register.
The register requires that the associated PTR or NTR filters be set before a condition register bit can set a
bit in the event register. The data in this register is latched until it is queried. Once queried, the register is
cleared.
Mode All
Remote Command :STATus:OPERation[:EVENt]?
Example STAT:OPER?
Preset 0
Status Bits/OPC dependencies Sequential command
Initial S/W Revision Prior to A.02.00
Operation Negative Transition
This command determines which bits in the Operation Condition register will set the
corresponding bit in the Operation Event register when the condition register bit has a negative
transition (1 to 0). The variable <integer> is the sum of the decimal values of the bits that you
want to enable.
Mode All
Remote Command :STATus:OPERation:NTRansition <integer>
:STATus:OPERation:NTRansition?
Example STAT:OPER:NTR 1 Align Now operation complete will be reported to the Status Byte Register.
Preset 0
Min 0
Max 32767
Status Bits/OPC
dependencies Sequential command
Initial S/W Revision Prior to A.02.00
142 Remote Language Compatibility Measurement Application Reference