Agilent Technologies Signal Analyzer N9030a - Manual (Page 1313)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Read-Write
Selection for allowing full read-write access to the USB ports.
Key Path System, Security, USB
Example :SYST:SEC:USB:WPR OFF Will set USB ports to Read-Write
Initial S/W Revision A.04.00
Read only
Selection for disabling write access to the USB ports.
Key Path System, Security, USB
Example :SYST:SEC:USB:WPR ON Will set USB ports to Read only
Initial S/W Revision A.04.00
Diagnostics
The Diagnostics key in the System menu gives you access to basic diagnostic capabilities of the
instrument.
Key Path System
Initial S/W Revision Prior to A.02.00
Show Hardware Statistics
Provides a display of various hardware statistics. The statistics include the following:
•
Mechanical relay cycles
•
High and Low temperature extremes
•
Elapsed time that the instrument has been powered-on (odometer)
The display should appear listing the statistics, product number, serial number, and firmware
revision.
Remote Language Compatibility Measurement Application Reference 1313