Agilent Technologies Signal Analyzer N9030a - Manual (Page 1434)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Trigger
As the TV standard is changed, the current line value is clipped as necessary to keep it valid for
the chosen standard and field mode. For example, line 600 is selected in Entire Frame mode in
PAL-N; if NTSC-M is selected, the line number is clipped to 525. Or, if line 313 is selected in Field
1 mode in PAL-N and NTSC-M is selected, the line number is clipped to 263. Changing back to the
PAL-N standard will leave the line number at 263.
Key Path Trigger, TV
Remote Command :TRIGger[:SEQuence]:TV:STANdard MNTSc | JNTSc | NTSC443 | MPAL | BPAL |
NPAL | CPAL | PAL60 | LSEC
:TRIGger[:SEQuence]:TV:STANdard?
Example TRIG:TV:STAN MPAL
TRIG:TV:STAN?
Preset MNTS
State Saved Saved in instrument state
Readback Displays Readback value
Initial S/W Revision Prior to A.02.00
NTSC-M
Sets the TV standard to NTSC-M.
Key Path Trigger, TV, Standard
Example TRIG:TV:STAN MNTS
Readback NTSC-M
Initial S/W Revision Prior to A.02.00
NTSC-Japan
Sets the TV standard to NTSC-Japan.
Key Path Trigger, TV, Standard
Example TRIG:TV:STAN JNTS
Readback NTSC-Japan
Initial S/W Revision Prior to A.02.00
1434 Remote Language Compatibility Measurement Application Reference