Agilent Technologies Signal Analyzer N9030a - Manual (Page 888)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Mode Setup
This string is limited to the first 20 characters of the input string (message unit).
Further details of these errors, after they have occurred, can be reviewed in the Cmd Error Log,
provided that Cmd Error Logging is enabled.
Key Path Mode Setup
Preset Previously-selected value
Default On
Logging
N9061A supports logging of errors. These errors comprise details of command errors and legacy
commands that have been received but are not supported by the N9061A application.
To enable and view the error log, press the Mode Setup hardkey on the front panel, then press the
Logging
softkey.
Key Path Mode Setup
Previous Page/Next Page
When you are in the Logging menu, the main Signal Analysis display is obscured by the logging
page. The most recent log starts from the bottom of the window. Previous Page and Next Page allow
you to scroll through the log file. To include commands sent to the instrument since the log
window display was opened, press Refresh.
Key Path Mode Setup, Logging
Cmd Error Log
Allows you to turn the command error logging on or off.
Logging should not be used in a secure environment.
l
When set to On, all error messages are stored in a log file, regardless of whether they have been
displayed on the screen.
l
When set to Off, no further command error messages are written to the log file. Switching Cmd
Error Log
to Off does not clear the log file. The default is Off.
The log file is also stored as a text file, called Logfile.txt, on the instrument. It is stored in the
D:\
drive, in the folder: \User_My_Documents\[USERNAME]\My Documents\RLC\data.
The maximum size of the log is 10 MB. When the file reaches its maximum size, the first ten
percent of the file is automatically discarded, to clear space for subsequent error messages.
888 Remote Language Compatibility Measurement Application Reference