Agilent Technologies Signal Analyzer N9030a - Manual (Page 250)

5 Legacy Command Descriptions
BTC (Transfer Trace B to Trace C)
BTC (Transfer Trace B to Trace C)
Syntax
Legacy Products
8566A/B, 8568A/B
Description
Transfers Trace B data to Trace C
Trace C cannot be an active trace. This means that the data in Trace C cannot be updated as the
instrument sweeps. To ensure that the current settings of the instrument are reflected in the data
transferred from Trace B to Trace C, you must follow the four step process below.
1. Select single sweep mode (S2 or SNGLS command)
2. Select the desired instrument settings
3. Take one complete sweep
4. Transfer the data
Format BTC
Query Data Type N/A
SCPI Equivalent Commands :TRACe:COPY TRACE2, TRACE3 (see "Copy/Exchange" on page 1375 )
Notes The functions of BTC are identical to the command "KSl (Transfer Trace B to Trace C)"
on page 339 .
250 Remote Language Compatibility Measurement Application Reference