Agilent Technologies Signal Analyzer N9030a - Manual (Page 1304)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Key Path System, Restore System Defaults
Example :SYST:DEF INP
Initial S/W Revision Prior to A.02.00
Restore Power On Defaults
This selection causes the Power On settings to be a reset to their default value. This level of
Restore System Defaults does not affect any other system settings, mode settings and does not
cause a mode switch. The Power On settings and their default values are Power On Type reset to
Mode and Input/Output Defaults and Power On Application reset to whatever the factory set as its
default value.
Confirmation is required to restore the factory default values. The confirmation dialog is:
Key Path System, Restore System Defaults
Example :SYST:DEF PON
Initial S/W Revision Prior to A.02.00
1304 Remote Language Compatibility Measurement Application Reference