Agilent Technologies Signal Analyzer N9030a - Manual (Page 1298)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
State Saved No
Range On | Off
Initial S/W Revision Prior to A.02.00
HiSLIP Server
Turns the HiSLIP server capability On or Off, enabling you to limit SCPI access over LAN through
the HiSLIP server.
HiSLIP stands for High Speed LAN Instrument Protocol and is part of the IVI–6.1 specification.
Here is an example of a VISA connection string used to connect to the HiSLIP Server on an X-
Series Spectrum Analyzer:
TCPIP0::a-n9030a–93016::hislip0::INSTR
In the example above, hislip0 is the HiSLIP device name that VISA users must include in their
HiSLIP VISA Address strings. Your HiSLIP device name may be different depending on your VISA
settings.
Key Path System, I/O Config, SCPI LAN
Mode All
Remote Command :SYSTem:COMMunicate:LAN:SCPI:HISLip:ENABle OFF|ON|0|1
:SYSTem:COMMunicate:LAN:SCPI:HISLip:ENABle?
Example :SYST:COMM:LAN:SCPI:HISL:ENAB OFF
Preset This is unaffected by Preset, but is set to ON with a “Restore System Defaults->Misc”
State Saved No
Range On | Off
Initial S/W Revision A.11.00
SCPI Socket Control Port (Remote Command Only)
Returns the TCP/IP port number of the control socket associated with the SCPI socket session.
This query enables you to obtain the unique port number to open when a device clear is to be
sent to the instrument. Every time a connection is made to the SCPI socket, the instrument creates
a peer control socket. The port number for this socket is random, so you must use this command
to obtain the port number of the control socket. To force a device clear on this socket, open the
port and send the string “DCL ” to the instrument.
If this SCPI command is sent to a non-SCPI Socket interface, then 0 is returned.
1298 Remote Language Compatibility Measurement Application Reference