Agilent Technologies Signal Analyzer N9030a - Manual (Page 752)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Marker Function
Dependencies If BW & Avg Type is in an Autocoupled state, the (up to three) measurements taken by Measure
at Marker are taken with Auto Coupled settings for the functions in the BW menu, even if those
functions are in manual.
Couplings If the specified Marker is not on, the analyzer turns it on at the center of the screen and does a
peak search before performing the function.
Status Bits/OPC
dependencies OPC goes true when the measurement is complete
Backwards
Compatibility SCPI :MEASure:EMI:MARKer[1]|2|...12?
This command is included for compatibility with the E7400 and PSA option 239 . Performs a
Measure at Marker function at the specified marker’s current frequency and returns the results.
Initial S/W Revision A.02.00
Measure at Marker presents its information in a separate window that normally appears in the
upper right of the display, but it can be repositioned to the upper left.
The Measure at Marker box shows the detector name for the selected detectors and “Off” for those
not selected. The names used are:
752 Remote Language Compatibility Measurement Application Reference