Agilent Technologies Signal Analyzer N9030a - Manual (Page 1258)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
System
Initial S/W Revision A.02.00
Modified at S/W
Revision A.04.00
Exit Without Saving
Pressing this key will exit the Configure Applications utility without saving your changes.
Key Path System, Power On, Configure Applications
Initial S/W Revision A.02.00
Modified at S/W
Revision A.04.00
Restore Power On Defaults
This selection causes the Power On Type and Power On Application settings to be a reset to their
default values. This level of Restore System Defaults does not affect any other system settings,
mode settings and does not cause a mode switch. The Power On key, under the Restore System
Defaults menu, causes the same action.
If you press any key other than OK or Enter, it is construed as a Cancel, because the only path
that will actually cause the reset to be executed is through OK or Enter.
Key Path System, Power On
Example :SYST:DEF PON
Initial S/W Revision Prior to A.02.00
1258 Remote Language Compatibility Measurement Application Reference