Agilent Technologies Signal Analyzer N9030a User Manual
Page 1136
6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Source
Agilent EXG N5172B
X
X
X
X
X
Agilent MXG N5182B
X
X
X
X
X
Agilent PSG E8257D
X
X
X
Agilent PSG E8267D
X
X
X
For X-Series software versions earlier than A.10.01, option UNZ (Fast switching) was required on the MXG
for some use cases. This is no longer the case, option ESC now works without MXG option UNZ for all
use cases. (Note that you will get better performance if your MXG has option UNZ, because without
option UNZ your sweep speeds will be noticeably slower.)
While in the Select Source menu and its submenus, detailed instructions are presented that tell
you how to operate the Select Source functions. Basically they tell you to first use the up and
down arrow keys to move the selection highlighted in the “Available Source List” to the source
that you want to use. The list of available sources includes any sources that you have previously
used (unless you have deleted them) and any found while in the “Add Source to List” menu.
When the source you want to use is highlighted, press “Select Highlighted Source” or “Enter”.
The source you have selected shows up at the bottom of the screen as the “Current Source”. Press
“Verify Current Source Connection” to make sure that the interface connection to the Source is
still functional.
At any time you may use the “Add Source to List” or “Delete Highlighted Source” keys to find new
sources or remove a source from the list of available sources.
Key Path
Source
Readback Text
Two lines of readback give the type information and serial number of the current source, in
square brackets
Initial S/W Revision
A.06.01
Point Trigger
Shows point trigger type selected and navigates to the Point Trigger menu.
The Point Trigger menu lists all analyzer point trigger types. The analyzer and source point trigger
synchronization can be done using SCPI bus commands or by using external trigger output and
input lines.
1136
Remote Language Compatibility Measurement Application Reference