Agilent Technologies Signal Analyzer N9030a - Manual (Page 1058)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Save
Limit Selection
These keys let you pick which Limit Line to save. Once selected, the key returns back to the
Export Data menu and the selected Limit Line number is annotated on the key.
The next step in the Save process is to select the Save As key in the Export Data menu.
Key Path Save, Data, Limit Line
Notes auto return
Preset Not part of Preset, but is reset to LLINE1 by Restore Mode Defaults; survives shutdown
Initial S/W Revision A.02.00
Measurement Results
Pressing this key selects Meas Results as the data type to be exported. Pressing the key a second
time brings up the Meas Results menu, which allows you to select which Meas Result to save. In
the Swept SA measurement, there are three types of Measurement Results files: Peak Table,
Marker Table and Spectrogram.
See "Meas Results File Contents" on page 1059 .
See "Marker Table" on page 1059 .
See "Peak Table" on page 1062 .
See Spectrogram
Remote Command :MMEMory:STORe:RESults:MTABle|PTABle|SPECtrogram <filename>
Example :MMEM:STOR:RES:MTAB “myResults.csv” Saves the results from the current marker table to
the file myResults.csv in the current path.
:MMEM:STOR:RES:PTAB “myResults.csv” Saves the results from the current peak table to the
file myResults.csv in the current path.
:MMEM:STOR:RES:SPEC “myResults.csv” Saves the results from the current Spectrogram
display to the file myResults.csv in the current path.
The default path is My Documents\SA\data\SAN\results
Notes If the save is initiated via SCPI, and the file already exists, the file will be overwritten.
Using the C: drive is strongly discouraged, since it runs the risk of being overwritten during an
instrument software upgrade.
Both single and double quotes are supported for any filename parameter over SCPI.
Dependencies If a save of Marker Table results is requested and the Marker Table is not on, no file is saved and
a message is generated
If a save of Peak Table results is requested and the Peak Table is not on, no file is saved and a
1058 Remote Language Compatibility Measurement Application Reference