Agilent Technologies Signal Analyzer N9030a - Manual (Page 426)

5 Legacy Command Descriptions
OL (Output Learn String)
OL (Output Learn String)
Syntax
Legacy Products
8566A/B, 8568A/B
Description
Transmits information to the controller that describes the state of the instrument when the OL
command is executed. This information is called the “Learn String.”
The Learn String can be sent from the controller memory back to the instrument to restore the
instrument to its original state.
The OL command is not completely supported, due to differences between the X-Series and
8566/8568. The following table outlines each byte of the array and the bits supported within that
byte.
Byte Support Information
1 Fixed decimal value 31
2 Fixed decimal value 118
3 to 9 Supported
10 Supported
11 Unsupported: Fixed decimal 0
12 to 17 Supported
18 Supported: Bits 6, 2, 1 and 0
Unsupported: Bits 7, 5, 4, and 3
19 Supported:
Bits 7, 6, 4, 3, and 0
Bit 5 on X-Series only
Unsupported:
Bits 1 and 2
426 Remote Language Compatibility Measurement Application Reference