Agilent Technologies Signal Analyzer N9030a - Manual (Page 1454)

6 RLC Swept SA Measurement Front-Panel & SCPI Reference
View/Display
Key Path View/Display, Display, System Display Settings, Backlight
Example DISP:BACK ON
Readback On
Initial S/W Revision Prior to A.02.00
Off
Turns the display backlight off.
Key Path View/Display, Display, System Display Settings, Backlight
Example DISP:BACK OFF
Readback Off
Initial S/W Revision Prior to A.02.00
Backlight Intensity
An active function used to set the backlight intensity. It goes from 0 to 100 where 100 is full on
and 0 is off. This value is independent of the values set under the Backlight on/off key.
Key Path View/Display, Display, System Display Settings
Remote Command :DISPlay:BACKlight:INTensity <integer>
:DISPlay:BACKlight:INTensity?
Example DISP:BACK:INT 50
Preset 100 (Set by Restore Misc Defaults)
Min 0
Max 100
Initial S/W Revision Prior to A.02.00
Normal
Single window view of the frequency domain or zero span. This is the classic SA view. This is
also the View into which the analyzer switches whenever you do anything that causes the
frequency limits to change, for example:
•
If you switch inputs (for example, if you switch from the RF Input to External Mixing)
•
If, while in External Mixing, you edit the Harmonic Table
1454 Remote Language Compatibility Measurement Application Reference