Agilent Technologies Signal Analyzer N9030a - Manual (Page 160)

3 Programming the Analyzer
STATus Subsystem
Questionable Integrity Register
The following commands and queries are available for this register:
"Questionable Integrity Condition" on page 160
"Questionable Integrity Enable" on page 160
"Questionable Integrity Event Query" on page 161
"Questionable Integrity Negative Transition" on page 161
"Questionable Integrity Positive Transition" on page 162
Questionable Integrity Condition
This query returns the decimal value of the sum of the bits in the Questionable Integrity
Condition register.
The data in this register is continuously updated and reflects the current conditions.
Mode All
Remote Command :STATus:QUEStionable:INTegrity:CONDition?
Example STAT:QUES:INT:COND?
Preset 0
Status Bits/OPC dependencies Sequential command
Initial S/W Revision Prior to A.02.00
Questionable Integrity Enable
This command determines which bits in the Questionable Integrity Condition Register will set bits
in the Questionable Integrity Event register, which also sets the Integrity Summary bit (bit 9) in
the Questionable Register. The variable <integer> is the sum of the decimal values of the bits you
want to enable.
Mode All
Remote
Command :STATus:QUEStionable:INTegrity:ENABle <integer>
:STATus:QUEStionable:INTegrity:ENABle?
Example STAT:QUES:INT:ENAB 8
Measurement Uncalibrated Summary will be reported to the Integrity Summary of the Status Questionable
register.
160 Remote Language Compatibility Measurement Application Reference