Agilent Technologies Signal Analyzer N9030a - Manual (Page 173)

3 Programming the Analyzer
STATus Subsystem
Mode All
Remote
Command :STATus:QUEStionable:TEMPerature:NTRansition <integer>
:STATus:QUEStionable:TEMPerature:NTRansition?
Example STAT:QUES:TEMP:NTR 1
Reference Oscillator Oven not cold will be reported to the Temperature Summary of the Status Questionable
register.
Preset 0
Min 0
Max 32767
Status
Bits/OPC
dependencies Sequential command
Initial S/W
Revision Prior to A.02.00
Questionable Temperature Positive Transition
This command determines which bits in the Questionable Temperature Condition register will set
the corresponding bit in the Questionable Temperature Event register when the condition register
bit has a positive transition (0 to 1).
The variable <integer> is the sum of the decimal values of the bits that you want to enable.
Mode All
Remote
Command :STATus:QUEStionable:TEMPerature:PTRansition <integer>
:STATus:QUEStionable:TEMPerature:PTRansition?
Example STAT:QUES:TEMP:PTR 1
Reference Oscillator Oven became cold will be reported to the Temperature Summary of the Status
Questionable register.
Preset 32767
Min 0
Max 32767
Status
Bits/OPC
dependencies Sequential command
Initial S/W
Revision Prior to A.02.00
Remote Language Compatibility Measurement Application Reference 173