Agilent Technologies Signal Analyzer N9030a User Manual
Page 955
6 RLC Swept SA Measurement Front-Panel & SCPI Reference
Recall
If the .trace file is an "all trace" file, "To Trace" is ignored and the traces each go back to the trace
from which they were saved.
Once selected, the key returns back to the Recall Trace menu and the selected Trace number is
annotated on the key. Now you have selected exactly where the trace needs to be recalled.To
trigger a recall of the selected Trace, you must select the Open key in the Recall Trace menu.
When you select a trace, it makes that trace the current trace, so it displays on top of all of the
other traces.
Key Path
Save, Data, Trace
Mode
SA
Initial S/W Revision
Prior to A.02.00
To Trace
These menu selections let you choose the Trace where the recalled saved trace will go. Not all
modes have the full 6 traces available. The default is the currently selected trace, selected in this
menu or in the Trace/Detector, Export Data, Import Data, or Save Trace menus, except if you have
chosen All, then it remains chosen until you specifically change it to a single trace.
If the .trace file is an "all trace" file, "To Trace" is ignored and the traces each go back to the trace
from which they were saved.
Once selected, the key returns back to the Recall Trace menu and the selected Trace number is
annotated on the key. Now you have selected exactly where the trace needs to be recalled.To
trigger a recall of the selected Trace, you must select the Open key in the Recall Trace menu.
When you select a trace, it makes that trace the current trace, so it displays on top of all of the
other traces.
Key Path
Save, Data, Trace
Mode
SA
Initial S/W Revision
Prior to A.02.00
To Trace
These menu selections let you choose the Trace where the recalled saved trace will go. Not all
modes have the full 6 traces available. The default is the currently selected trace, selected in this
menu or in the Trace/Detector, Export Data, Import Data, or Save Trace menus, except if you have
chosen All, then it remains chosen until you specifically change it to a single trace.
Remote Language Compatibility Measurement Application Reference
955