Festo Контроллеры двигателя SFC-LAC - Manual (Page 10)

Contents and general safety instructions
VIII
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Safety instructions
When commissioning and programming positioning systems,
the safety regulations in this manual as well as those in the
operating instructions for the other components used should
be observed unconditionally.
The user must make sure that nobody is within the sphere of
influence of the connected actuators or axis system. Access
to the possible danger area must be prevented by suitable
measures such as protective screens and warning signs.
Warning
Electric axes move with high force and at high speed. ColliĆ
sions can lead to serious injury to human beings and damĆ
age to components.
· Make sure that nobody can reach into the sphere of inĆ
fluence of the axes or other connected actuators and
that no items are within the positioning range while the
system is connected to energy sources.
Warning
Faults in the parameterisation can cause injury to human
beings and damage to property.
· Enable the controller only if the axis system has been
correctly installed and parametrised.