Festo Контроллеры двигателя SFC-LAC - Manual (Page 187)

B. Supplementary information
B−25
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Device control
CI 207Dh 00h Var uint8 rw
Description Corresponds to HMI control" on the control panel and FCT" on the FCT.
Bit 0 = 0: Controller interface OFF,
control via HMI (control panel) and FCT ON
Bit 0 = 1: Controller interface ON (default),
control via HMI or FCT OFF
FHPP status data
CI 20A0h 01h, 02h Array uint32 r
Description FHPP input data (8 bytes of status data), 4 bytes each, consistent.
01h
FHPP status bytes 1−4 (SCON, SPOS, ...)
02h
FHPP status bytes 5−8 (actual position)
FHPP control data
CI 20A1h 01h, 02h Array uint32 r
Description FHPP output data (8 bytes of control data), 4 bytes each, consistent.
01h
FHPP control bytes 1−4 (CCON, CPOS, ...)
02h
FHPP control bytes 5−8