Festo Контроллеры двигателя SFC-LAC - Manual (Page 88)

5. Commissioning
5−6
Festo GDCP−SFC−LACI−IO−EN en 0812NH
5.1.4 Simultaneous attempts to access the controller
Caution
Simultaneous or alternating attempts to access the
SFC−LACI via FCT, control panel and controller interface
can cause unpredictable errors.
· Make sure that the FCT, the control panel and the conĆ
troller interface of the SFC−LACI are not used at the same
time.
Note
In the following cases, it is
not permitted to use the FCT
to access the SFC−LACI for purposes of writing data
(e.Ăg. downloading parameters) or for control (e.Ăg. Move
manually" or starting a homing run):
Ĉ While the SFC−LACI is executing a positioning motion
or when a motion is started during access (e.g. via the
control panel).
Ĉ If parametrisation or operation is carried out on the
SFC−LACI with the control panel.
Please note:
· Control by the FCT must not be activated while the drive
is in motion or control processes are taking place via
I/Os.