3 mounting the controller, 1 wall mounting, Mounting the controller – Festo Контроллеры двигателя SFC-LAC User Manual
Page 41: Wall mounting
Advertising
![background image](/manuals/464475/41/background.png)
2. Assembly
2−5
Festo GDCP−SFC−LACI−IO−EN en 0812NH
2.3
Mounting the controller
You can mount the SFC−LACI in one of two ways:
1. Wall mounting on a flat surface
2. H−rail mounting
Note
Mount the SFC−LACI or hat rail so that there is sufficient space
for
heat dissipation (above and below at least 40 mm).
2.3.1
Wall mounting
You will need:
ć
A mounting surface of approximately 250 x 320 mm
ć
2 sets of central supports, type MUP−8/12 (accessories).
The four brackets are clipped into the edge of the housing
(see Fig. 2/2).
ć
4 tapped holes for screw size M3 with matching screws.
120 mm
Fig. 2/2:
Wall mounting
Advertising