Festo Контроллеры двигателя SFC-LAC - Manual (Page 87)

5. Commissioning
5−5
Festo GDCP−SFC−LACI−IO−EN en 0812NH
5.1.3 Before switching on
When the SFC−LACI is switched on, the controller interface is
activated as standard [HMI= off ].
Caution
Unexpected movements of the drive due to incorrect or
incomplete parametrising
· Make sure that there is no active ENABLE signal on the
controller interface when switching on the SFC−LACI.
· Parametrise the entire system completely before
activating the controller with ENABLE or [HMI = on].