Festo Контроллеры двигателя SFC-LAC - Manual (Page 72)

4. The control panel (only type SFC−LACI−...−H2)
4−8
Festo GDCP−SFC−LACI−IO−EN en 0812NH
4.3 [Diagnostic
] menu
In order to display the system data and the currently effective
settings:
1. Select the [Diagnostic] menu in the main menu.
<ENTER>
2. Select a menu command. <ENTER>
{ } You can scroll through the data with the arrow
keys.
ESC You can use the <Menu> key to return to the
higher−order menu.
[Diagnostic] [...] Description
[Pos. set table] No. Number of the positioning record
a/r (e) Absolute (a) or relative (r) positioning,
(e) = energy optimised
Pos Target position
Vel Speed
acc *) Acceleration
dec *) Deceleration (Braking)
Work load *) Applied load ( = mass of the workpiece)
Yes *) Acceleration jerk
jd *) Deceleration jerk
t_MC *) Damping time
*) After 5 s the lower part of the display changes.
} Diagnostic
Pos.set table
Axis parameter
System paramet.
SW information