Festo Контроллеры двигателя SFC-LAC - Manual (Page 207)

B. Supplementary information
B−45
Festo GDCP−SFC−LACI−IO−EN en 0812NH
User device name
CI 20FDh 00h Var V−string rw
Description Device name assigned by user.
Max. 24 characters (ASCII, 7−bit). Default: motor001"
HMI parameter
CI 20FFh 01h, 02h Array uint8 rw
Description Control panel settings (type SFC−LACI−...−H2 only)
LCD current
(brightness)
01h
(brightness)
Values: 1...8. Default: 5
LCD contrast 02h
Values: 0...63 (0x00...0x3F). Default: 0
Measure
(unit of
03h
(unit of
measurement
system)
Unit of measurement system on the control panel (see 20D0/01h)
Fixed = 1: millimetre,
e..Ăg. mm, mm/s, mm/s 2
Scaling factor
(number of decimal
04h
(number of decimal
positions) Number of post−decimal positions (see 20D0/02h)
Fixed = 2: 2 post−decimal positions