Festo Контроллеры двигателя SFC-LAC - Manual (Page 104)

5. Commissioning
5−22
Festo GDCP−SFC−LACI−IO−EN en 0812NH
5.3.2 Procedure
Starting the FCT
1. Connect the SFC−LACI to your PC via the parametrising
interface (RS232). } Chapter 3.5.
2. Start the FCT:
Double click on the FCT icon on the desktop
ć or ć
Switch to Windows and select the entry [Festo Software]
[Festo Configuration Tool] in the menu [Start].
3. Create a project in the FCT or open an existing project.
Add a device to the project with the SFC−LAC PlugIn.
Instructions on parametrising and commissioning
FCT framework Information on working with projects and on inserting a deĆ
vice in a project can be found in the help for the FCT frameĆ
work with the command [Help] [Contents FCT general].
PlugIn SFC−LAC The SFC−LAC plugin for the FCT supports all the steps necessĆ
ary for commissioning an SFC−LACI. The necessary parameterĆ
isation can be executed offline, i.Ăe. without the SFC−LACI
being connected to the PC. This enables preparation for the
actual commissioning, e.Ăg. in the design office when a new
system is planned.
Further information can be found in the plug−in help:
Command [Help] [Contents of installed PlugIns] [Festo
(manufacturer name)ā] [SFC−LAC (PlugIn name)ā].