6 setting the tool mass, Setting the tool mass – Festo Контроллеры двигателя SFC-LAC User Manual
Page 98
Advertising
![background image](/manuals/464475/98/background.png)
5. Commissioning
5−16
Festo GDCP−SFC−LACI−IO−EN en 0812NH
5.2.6
Setting the tool mass
The weight of tools (e.Ăg. grippers) on the front plate
(or piston rod) of the drive has to be entered here.
1. Select [Settings] [Axis parameter] [Tool load].
2. Set the tool mass with the arrow keys.
3. Accept the setting with OK<Enter>. The setting will then
take effect in the drive.
4. Save the parameter settings in EEPROM with the
[SAVE]
menu command.
The applied load (= mass of the individual workpieces),
on the other hand, is entered in the positioning records
( [Settings][Position set][Work load] ).
Advertising