Festo Контроллеры двигателя SFC-LAC User Manual
Page 158
A. Technical appendix
A−4
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Electrical data
Load voltage supply
Ĉ Nominal voltage
Ĉ Nominal current (max. continuous motor current)
Ĉ Peak current
Power connection, pins A1, A2)
48 VDC (+5/−10 %) (Load power down:
Ţ 36 V)
10 A
20 A
Logic voltage supply
Ĉ Nominal voltage
Ĉ Peak current
Power connection, pins 1, 2
24 VDC ± 10 %
3.8 A (when using the local digital outputs,
see section 3.2).
Controller interface (I/O supply)
Ĉ Nominal voltage
Ĉ Idle current
Ĉ Peak current
Ĉ Specification
Connection I/F, pins 1, 8
24 VDC ± 10 %
0.05 A
2.1 A (max. 0.5 A per output)
See section 3.6.1
Protection against electric shock
(protection against direct and indirect contact as
per IEC/DIN EN 60204−1)
By means of PELV power circuit
(Protected Extra−Low Voltage)
Parametrising interface specification
RS232, 38400 Baud, see sections 3.5 and B.1.3.