Festo Контроллеры двигателя SFC-LAC - Manual (Page 166)

B. Supplementary information
B−4
Festo GDCP−SFC−LACI−IO−EN en 0812NH
B.1.2 Accessing the CI objects
CI objects are accessed via
ć FCT or
ć a terminal program.
Caution
Faulty parameterisation can cause personal injury and
material damage.
Incorrect parameterisation of the CI objects can cause the
controller to react unexpectedly and the motor may start
uncontrolled.
· It is preferable to use the FCT or the control panel for
parametrising and commissioning.
The FCT and control panel take into account mutual deĆ
pendencies between the objects and, in part, prevent
incorrect parameter settings.
· Use CI commands only if you already know their effects
and if they are permitted for your SFC−LACI. Please note
that some commands reorganise or delete parts of the
memory.
· Select the commands in accordance with the object list
in section B.2. Observe the associated detailed descripĆ
tions.
· Use the CI commands only in special cases which require
direct access to the controller.