Festo Контроллеры двигателя SFC-LAC - Manual (Page 69)

4. The control panel (only type SFC−LACI−...−H2)
4−5
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Operator keys Basic functions of the operator keys:
Key Function
Menu
MENU Activates the main menu from the status
display.
ESC Rejects the current input and returns in
steps to the higher−order menu level or
status display.
EMERG.STOP If [HMI = on]: interrupts the current posiĆ
tioning procedure (
> Error mode; conĆ
firm with <Enter>, then automatic return
to the status display).
Enter
OK Confirms the current selection or input.
Enter
SAVE Saves parameter settings permanently in
the EEPROM.
START/STOP Starts or stops a positioning procedure
(only in Demo mode). After stop: Display
of current position; use <Menu> to return
to the higher−order menu level.
v
{ } Scrolls within a menu level in order to
select a menu command.
V EDIT Sets parameters.
Tab. 4/1: Key functions (overview)