Festo Контроллеры двигателя SFC-LAC - Manual (Page 215)

B. Supplementary information
B−53
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Extended device faults A
CI 2FFAh 00h Var uint16 r(w)
Description (reserved)
Extended device faults B
CI 2FFBh 00h Var uint16 r(w)
Description Reading or deleting the error message(s).
Explanations of the error messages can be found in chapter 6.4 Diagnosis".
Writing <0>:
Delete all error messages (in 2FF1h, 2FFAh, 2FFBh and 2FFCh)
Read:
Bit 0: ERROR INTERPOLATION CYCLE TIME (with FHPP continuous mode: misĆ
sing position specification, missing toggle bit)
Bit 1: OVERCURRENT POWER STAGE
Bit 2: LIMIT SWITCH ACTIVATED
Bit 3: BLOCK DURING JOG MODE
Extended device errors C
CI 2FFCh 00h Var uint16 r(w)
Description (reserved)