Festo Контроллеры двигателя SFC-LAC - Manual (Page 22)

1. System overview
1−4
Festo GDCP−SFC−LACI−IO−EN en 0812NH
To construct a positioning system with the SFC−LACI, you
need the following components:
SFC−LACI Motor controller, optionally with control panel
Drive Electric drive DNCE−...−LAS or DFME−...−LAS, with accessories
and mounting attachments
Power supply unit 24 V For logic voltage supply
Power supply unit 48 V For load voltage supply
Power supply cable For supplying the SFC−LACI with logic and load voltage
} Section 3.2
Motor cable /
Encoder cable For connecting the drive to the SFC−LACI
} Section 3.4
Programming cable For information transfer between the PC and the SFC−LACI
} Section 3.5
Pilot line For information transfer between the higher−level controller
and the SFC−LACI
} Section 3.6