Festo Контроллеры двигателя SFC-LAC User Manual
Page 96
Advertising
![background image](/manuals/464475/96/background.png)
5. Commissioning
5−14
Festo GDCP−SFC−LACI−IO−EN en 0812NH
Note
If the axis zero point is modified:
Existing software end positions and the target positions in
the position set table will be shifted together with the axis
zero point.
·
Teach the software end positions and the target posiĆ
tions again if needed.
The project zero point PZ can only be set via FCT or object
21F4h.
Advertising