Rockwell Automation 1755-OF8 GuardPLC Controller Systems User Manual
Guardplc controller systems
Advertising
This manual is related to the following products:
1755-HSC GuardPLC Controller Systems, 1755-IF8 GuardPLC Controller Systems, 1755-IB24XOB16 GuardPLC Controller Systems, 1755-A6 GuardPLC Controller Systems, 1755-L1 GuardPLC Controller Systems, 1754-L28BBB GuardPLC Controller Systems, 1753-IB20XOB8 GuardPLC Controller Systems, 1753-OB16 GuardPLC Controller Systems, 1753-IB16 GuardPLC Controller Systems, 1753-L32BBBP-8A GuardPLC Controller Systems, 1753-L32BBBM-8A GuardPLC Controller Systems, 1753-L28BBBP GuardPLC Controller Systems, 1753-L28BBBM GuardPLC Controller Systems
Table of contents
Document Outline
- GuardPLC Controller Systems User Manual, 1753-UM001C-EN-P
- Summary of Changes
- Table of Contents
- Preface
- 1 - Overview of Safety Controllers
- 2 - Installation
- 3 - General Wiring Considerations
- 4 - Wire GuardPLC 1600, GuardPLC 1800, and GuardPLC 1200 Controllers
- 5 - Wire the GuardPLC 2000 Controller and I/O
- Introduction
- Safety-related Digital Inputs
- Safety-related Digital Outputs
- Safety-Related Analog Inputs (1755-IF8)
- High-speed Counter Module (1755-HSC)
- Safety-related Analog Output Module (1755-OF8)
- Current Draw
- Wire the 1755-IB24XOB16 Digital I/O Module
- Wire the 1755-IF8 Analog Input Module
- Wire the 1755-OF8 Analog Output Module
- Wire the 1755-HSC Counter Modules
- 6 - Wire 1753-IB16, 1753-OB16, and 1753-IB20XOB8 Modules
- 7 - Wire and Configure the 1753-IB8XOB8 Module
- 8 - Wire and Configure the 1753-IB16XOB8 Module
- 9 - Wire the 1753-IF8XOF4 Analog I/O Module
- 10 - Wire the 1753-OW8 Relay Output Module
- 11 - Pulse Testing
- 12 - High-Speed Counters
- 13 - Controller Configuration and Modes of Operation
- 14 - Use the Control Panel to Monitor Status
- 15 - Diagnostics
- Introduction
- View Controller Diagnostics
- GuardPLC 1200 Controller Status Indicators
- GuardPLC 1600 and GuardPLC 1800 Controllers and GuardPLC Distributed I/O
- GuardPLC 2000 Controller Status Indicators
- 1755-IB24XOB16 Module Status Indicators
- 1755-IF8 Analog Input Module Status Indicators
- 1755-OF8 Analog Output Module Status Indicators
- 1755-HSC Combination High-speed Counter and Output Module Status Indicators
- 16 - Peer-to-peer Communication Overview
- 17 - Configure Peer-to-Peer Communication
- 18 - Introduction to EtherNet/IP Communication
- 19 - Use GuardPLC Controller as an Adapter
- Introduction
- Configure the GuardPLC Controller as an Adapter
- Open a Class 1 Connection from a Logix Controller to the GuardPLC Controller
- Open a Class 3 Connection from a Logix Controller
- Use a GuardPLC Controller as an Unconnected Adapter
- Use Unconnected PCCC Messaging from a PLC-5 or SLC 5/05 Controller
- Use Unconnected CIP Messaging from a PanelView Standard Terminal
- 20 - Use the GuardPLC Controller as a Scanner
- Introduction
- Prepare the GuardPLC Controller for Class 1 Scanner Connections
- Configure the EtherNet/IP Driver
- Configure Connections in RSNetWorx for EtherNet/IP Software
- Open a Connection to a Logix Controller
- Save the Connection Configuration in the GuardPLC Controller
- Remove the Connection Configuration
- 21 - Communicate with ASCII Devices
- 22 - Communicate with Modbus and Profibus Devices
- A - Specifications
- B - System Signal Variables
- C - Wiring Examples
- Introduction
- GuardPLC 1600 Controller
- GuardPLC 1800 Controller
- 1753-IB16 Modules
- 1753-OB16 Modules
- 1753-IB20XOB8 Module
- 1753-IB8XOB8 Modules
- 1753-IB16XOB8 Modules
- 1753-OW8 Modules
- 1753-IF8XOF4 Modules
- GuardPLC 1200 Controller
- 1755-IB24XO16 Digital Input/Output Modules
- 1755-IF8 Analog Input Modules
- 1755-OF8 Analog Output Modules
- 1755-HSC High Speed Counter Module
- D - Replacing the Back-up Battery
- Index
- Back Cover