Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 104)

L-force | PLC Designer
The Individual Components
102 DMS 3.2 EN 02/2011 TD29

If the mouse point is in a visualization, the current X and Y position of the cursor in
pixels relative to the upper left corner of the screen is given. If the mouse pointer is on
an Element, or if an element is being processed, then its number is indicated. If you
have an element to insert, then it also appears (e.g. Rectangle).
If you have chosen a menu command but haven't yet confirmed it, then a short
description appears in the status bar.
The display of the statusbar is optional (see 'Project' 'Options' category Desktop).
6.1.9 Context Menu
Shortcut: <Shift>+<F10>
Instead of using the menu bar for executing a command, you can use the right mouse
button. The menu which then appears contains the most frequently used commands
for a selected object or for the active editor. The choice of the available commands
adapts itself automatically to the active window. The choice of the available
commands adapts itself automatically to the active window.
6.2 Project Options...
With this command the dialog box for setting options is opened. The options are
divided into different categories. Choose the desired category on the left side of the
dialog box by means of a mouse click or using the arrow keys and change the options
on the right side.
An image of the options which are set for the current project, will be found in the
Resources tab in component 'Workspace'.
The settings amongst other things serve to configure the view of the main window.
They are, unless determined otherwise, saved in the file "plcdesigner.ini" and restored
at the next PLC Designer startup.