Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 299)

L-force | PLC Designer
Editors in PLC Designer

DMS 3.2 EN 02/2011 TD29 297
• The lined cross directly in front of an assignment:
How to set the cursor in FBD
The cursor can be set at a certain position by clicking the mouse, or with the help of
the keyboard.
Using the arrow keys, you can jump to the nearest cursor position in the selected
direction at any time. All cursor positions, including the text fields, can be accessed
this way. If the last cursor position is selected, then the <up> or <down> arrow keys
can be used to select the last cursor position of the previous or subsequent network.
An empty network contains only three question marks "???". By clicking behind these,
the last cursor position is selected.
'Insert' 'Assign' in FBD
Symbol: Shortcut: <Ctrl>+<A>
This command inserts an assignment.
Depending on the selected position (see 'Cursor positions in FBD'), insertion takes
place directly in front of the selected input (Cursor Position 2), directly after the
selected output (Cursor Position 4) or at the end of the network (Cursor Position 6).
For an inserted assignment, a selection can be made accompanying the entered text
"???", and the assignment can be replaced by the variable that is to be assigned. For
this you can also use the Input Assistant. For the possibility to enter an address
instead of the variable name please regard the description of the options dialog in
Chapter: Comments, Linebreaks, 'Extras' 'Options'.
In order to insert an additional assignment to an existing assignment, use the 'Insert'
'Output' command.