Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 687)

L-force | PLC Designer
PLC Designer Visualization

DMS 3.2 EN 02/2011 TD29 685
20.3.12 'Insert' 'Table'
Symbol:
Use this command to insert a Table element as an element into your current
visualization. It is used to display the current values of the elements of an array.
While pressing the left mouse button, bring up an area in the desired size. Before the
element gets displayed the configuration dialog 'Configure table'' will be opened. Here
you will find additionally to the standard categories Tooltip and Security the
categories 'Table', 'Columns', 'Rows' and 'Selection' where you can define contents and
appearance of the table.
20.3.13 'Insert' 'ActiveX-Element'
Symbol:
Use this command to insert an ActiveX Control into your current visualization. It can
be used later on Windows32 systems in CoDeSys HMI and the CoDeSys Target-
Visualization. While pressing the left mouse button, bring up an area in the desired
size. It will be inserted as a rectangle with the inscription "Control:".
To select a certain ActiveX Control and to configure the method calls and the display
open the dialog 'Configure ActiveX-Control' by a double-click on the element resp. via
command 'Extras' 'Configure'.
20.3.14 'Insert' 'Scrollbar'
Symbol:
Use this command to insert a Scrollbar element in the current visualization. In the
configuration of that element you can assign a variable to the element, the value of
which will be changed when the user moves the scrollbar slider in online mode. Vice
versa the slider position will reflect the current value of the variable if this value is
given by any other input.
In the Target-Visualization the element will work only if it is supported by the target
system.
Insert the element by drawing a rectangle in desired size. The shape of the rectangle
determines whether the scrollbar will be entered vertically or horizontally .