Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 629)

L-force | PLC Designer
Compiler Errors and Warnings

DMS 3.2 EN 02/2011 TD29 627
4418
"FB/FX-Name too long (max. 8 characters)"
The symbolic name of an (extended) POU is too long.
4419
"Expected format of line ""(* Name: <FB/FX-Name> *)"" "
Correct the line correspondingly.
4420
"Name of FB/FX parameter missing"
Check the POUs.
4421
"Type of FB/FX parameter invalid"
Check the POUs.
4422
"Type of FB/FX parameter missing"
Check the POUs.
4423
"Invalid FB/FX call parameter"
Check the interface of the POU.
4424
"Warning: FB/FX for call either missing or parameters invalid or has '0' parameters"
The called POU is not imported yet or is not correct or has no parameters (in the last
case you can ignore the error message).
4425
"Definition of label missing"
The aim (label) of the jump is not defined.