Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 446)

L-force | PLC Designer
The Resources
444 DMS 3.2 EN 02/2011 TD29

The command Format Dec/Hex is also available to toggles the input format between
'decimal' and hexadecimal' .
Parameter lists in boot project
It depends on the target system, whether parameter lists will be regarded when a
boot project is created.
8.11.4 Export / Import of parameter lists
'Extras' 'Export'
The command 'Export' of the 'Extras' menu can be used to export the lists of the
Parameter Manager to a XML-file. This file for example might be imported to another
project by using the import function in the PLC Designer Parameter Manager. The
standard dialog for saving a file will be opened, the file extension *.prm will be preset.
All lists available in the Parameter Manager will be written to the export file.
The content of the Parameter Manager also can be exported using the general project
export function ('Project' 'Export').
'Extras' 'Import'
The command 'Import' of the 'Extras' menu can be used to import a XML-file which
describes parameter lists. This file for example might be created by using the export
function in the PLC Designer Parameter Manager.
If the import file contains a list, the name of which is already used in the Parameter
Manager, a dialog will open asking the user whether the existing list should be
overwritten.