Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 285)

L-force | PLC Designer
Editors in PLC Designer

DMS 3.2 EN 02/2011 TD29 283
7.4.2 'Insert' 'Operand'in text editors
With this command all variables in a dialog box are displayed. You can select whether
you would like to display a list of the global, the local, or the system variables.
If one of the operands is chosen, and the dialog box is closed with OK, then the
highlighted operand will be inserted at the present cursor position. (This is managed
here just as it is in the Input Assistant).
7.4.3 'Insert' 'Function' in text editors
With this command all functions will be displayed in a dialog box. You can choose
whether to have a list displaying user-defined or standard functions.
If one of the functions is selected and the dialog box is closed with OK, then the
highlighted function will be inserted at the current cursor position. (The management
will proceed, as in the input selection.)
If the With arguments option was selected in the dialog box, then the necessary input
and output variables will also be inserted.
7.4.4 'Insert' 'Function Block' in text editors
With this command all function blocks are displayed in a dialog box. You can choose
whether to have a list displaying user-defined or standard function blocks.
If one of the function blocks is selected and the dialog box is closed with OK, then the
highlighted function block will be inserted at the current cursor position. (This is
managed here just as it is in the Input Assistant).
If the With arguments option was selected in the dialog box, then the necessary input
variables of the function block will also be inserted. However you are not forced to
assign these parameters.