Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 573)

L-force | PLC Designer
Compiler Errors and Warnings

DMS 3.2 EN 02/2011 TD29 571
Example:
Variable Configuration:
VAR_CONFIG
plc_prg.aprg.ainst.in AT %IB0 : INT;
END_VAR
plc_prg:
index := INDEXOF(aprg);
The program aprg is referenced but not called. Thus plc_prg.aprg.ainst.in never will
get the actual value of %IB0.
1412
"Unexpected token NameName in pragma {pragma name}"
You are using a pragma which is not written correctly resp. which cannot be used at
this location. See keyword 'pragma' in the PLC Designer Online Help or Users Guide for
getting help for a correction.
1413
"'<Name>' is not a valid key for list '<Name>'. The key will be ignored"
In the pragma a nonexistent parameter list is specified. Check the list name resp. have
a look in the Parameter Manager for the currently available lists.
1414
Too many component definitions in pragma '<name>'
The Pragma contains more definitions (in square brackets) than there are elements in
the corresponding array, functionblock or structure.
1415
’<Name>’ (<Number>): The literal '<Number>' is assigned to more than one
enumeration
In the declaration of enumeration <Name> the same number is assigned to more than
one enumeration components (e.g. TYPE aenum (a:=1, b:=1); END_TYPE).
1500
"Expression contains no assignment. No code was generated."
The result of this expression is not used. For this reason there is no code generated for
the whole expression.