Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 587)

L-force | PLC Designer
Compiler Errors and Warnings

DMS 3.2 EN 02/2011 TD29 585
3405
"An error occured during import of PLC configuration"
The section for the PLC configuration in the .exp file is not correct.
3406
"Two steps with the name '<name'. Second step not imported."
The section for the SFC POU in the .exp file contains two steps with equal names.
Rename one of the steps in the export file.
3407
"Predecessor step '<name>' not found"
The step <name> is missing in the .exp file.
3408
"Successor step '<name>' not found"
The step <name> is missing in the .exp file.
3409
"No successing transition for step '<´name>' "
In the .exp file a transition is missing, which requires step <name> as preceeding step.
3410
"No successing step for transition '<name>'"
In the .exp file a step is missing which requires the transition <name> as preceeding
condition.
3411
"Step '<name>' not reachable from initial step"
In the .exp file the connection between step <name> and the initial step is missing.
3412
"Macro '<name>' not imported"
Check the export file.