Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 688)

L-force | PLC Designer
PLC Designer Visualization
686 DMS 3.2 EN 02/2011 TD29

20.3.15 'Insert' 'Meter'
Symbol:
Use this command to insert a Meter as an element into your current visualization. It
provides a scale which is defined as a sector of a circular arc, and a pointer element.
While pressing the left mouse button, bring up an area in the desired size. Before the
element gets displayed the configuration dialog Configure Meter will be opened. Here
you can define various parameters concerning the display of the element and a
preview is available to check the configuration before really inserting the element by
confirming the dialog.
20.3.16 'Insert' 'Bar Display'
Symbol:
Use this command to insert a Bar Display element into your current visualization. It is
used to visualize the value of the assigned variable by a bar indicating the value by its
length along a horizontal scale.
While pressing the left mouse button, bring up an area in the desired size. Before the
element gets displayed the configuration dialog 'Configure bar display' will be opened.
Here you can define various parameters concerning the display of the element and a
preview is available to check the configuration before really inserting the element by
confirming the dialog.
20.3.17 'Insert' 'Histogram'
Symbol:
Use this command to insert a Histogram element into your current visualization. It is
used to visualize the elements of an array by bars which are placed side by side each
indicating the value of the element by its length.
While pressing the left mouse button, bring up an area in the desired size. Before the
element gets displayed the configuration dialog 'Configure Histogram' will be opened.
Here you can define various parameters concerning the display of the element and a
preview is available to check the configuration before really inserting the element by
confirming the dialog.