Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 732)

L-force | PLC Designer
PLC Designer Visualization
730 DMS 3.2 EN 02/2011 TD29

Category Selection:
Dialog for configuring a Table, Category Selection
Here you can set the following parameters concerning the selection behaviour within
the table:
Selection color: Press this button to define a color for selected cells. You get the
standard dialog for choosing a color or a target-specific color selection list.
Selection type: Define which part of the table will be selected when you perform a
mouse-click on one of the table fields in online mode:
Select single cells: Only the cell will be selected.
Select only rows: The whole line will be selected.
Select only columns: The whole column will be selected.
Select rows and columns: The whole column and line will be selected.
Frame around selected cells: A selected cell gets surrounded by a frame.
Variable for selection X, Variable for selection Y: Here you each can enter a project
variable, which will indicate the X- resp. Y-Index of the selected table cell.