Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 429)

L-force | PLC Designer
The Resources

DMS 3.2 EN 02/2011 TD29 427
'Extras' 'Rename Watch List'
This command will only be available, if the 1-Window-Editor view of the Watch and
Recipe Manager is opened (target-dependant!). It opens a dialog for specifying the
new watch list name.
Note: If the tabular view is used, the watch list can be renamed in the Object
Organizer via command 'Project''Object' 'Rename'.
'Extras' 'Save Watch List'
With this command you can save a watch list. The dialog box for saving a file is
opened. The file name is preset with the name of the watch list and is given the
extension "*.wtc".
The saved watch list can be loaded again with 'Extras' 'Load Watch List'.
For example this allows to manage various "Recipes" for the same set of variables,
which can be loaded to the PLC as currently required.
'Extras' 'Load Watch List'
With this command you can reload a saved watch list, for example in order to reload a
certain recipe to the editor, so that it can be written to the PLC. The dialog box is
opened for opening a file. Select the desired file with the "*.wtc" extension. In the
dialog box that appears, you can give the watch list a new name. The file name is
preset without an extension.
With 'Extras' 'Save Watch List', you can save a watch list.
'Extras' 'Monitoring Active'
Short key: <Alt>+<X>+<M>
This command turns off resp. on the display of the values in the Watch and Recipe
Manager. If the Monitoring is activated, a check (ü) appears in front of the menu item.
'Extras' 'Write Recipe'
With this command in the Online Mode of the Watch and Recipe Manager you can
write the preset values (recipe values) into the variables.
Note: The command only concerns the values of that watch list, which is currently
selected in the Watch and Recipe Manager!