Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 435)

L-force | PLC Designer
The Resources

DMS 3.2 EN 02/2011 TD29 433
It depends on the definitions in a target specific description file which attributes
(columns) will be visible and editable in the Parameter Manager and in which way
they will be arranged in a parameter list. If the description file is missing, the complete
standard set of attributes will be displayed, each showing the default value.
Besides lists for project variables and project constants the Parameter Manager also
can handle lists for system parameters. Those are parameters which are given by the
target system. Furtheron you can create lists for functionblock instances or structure
variables which base on user-defined templates also created in the Parameter
Manager.
Due to the fact that the data are stored independently of the IEC-program, a
parameter list for example can be used for saving 'recipes', which are preserved even if
the program is replaced by another version. Furtheron a running PLC can be "fed" with
different recipes without the need of a re-download the program.
Parameter Manager Editor in »PLC Designer«
Note!
It is depending on the target system, whether the parameter manager will be
regarded at the creation of a
boot project
.