Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 206)

L-force | PLC Designer
The Individual Components
204 DMS 3.2 EN 02/2011 TD29

Dialog 'Label project <data base project name>'
Add Shared Objects
Command 'Project' 'Data Base Link' 'Add Shared Objects'
Use this command if you explicitely want to add new objects of data base category
'Shared Objects' to the locally opened project in PLC Designer. For objects of category
'Project Objects' this is not necessary, because the command 'Get (all) latest version(s)'
automatically calls all objects which are found in the data base project folder, even if
there are some which not yet available in the local project. But for objects of category
'Shared Objects' in this case just those objects will be called which are already
available in the local project.
So execute the command 'Add Shared Objects' to open the dialog 'Browse ENI'. A list in
the right part of the window shows all objects which are available in the data base
folder which is currently selected in the list on the left side. Choose the desired object
and press OK or do a doubleclick on the entry to insert the object to the currently
opened PLC Designer project.
Dialog 'Browse ENI'