Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 156)

L-force | PLC Designer
The Individual Components
154 DMS 3.2 EN 02/2011 TD29

If you want to change back to viewing the project in its original language, use
command 'Switch translation'.
Note!
Regard the specialities for texts in visualizations.
6.3.20 'Toggle translation'
If you have got displayed the project (not editable) in another language by command
'Show project translated', you can now switch between this language version and the
(editable) original version by using the command 'Switch translation' of menu 'Project'
'Translate (into another Language)' .
Note!
Regard the specialities for texts in visualizations.
6.3.21 'Project' 'Document'
This command lets you print the documentation of your entire project. The elements
of a complete documentation are:
• The POUs,
• the contents of the documentation,
• the data types,
• the visualizations
• the resources, global variables, variables configuration, the Sampling Trace, the
PLC Configuration, the Task Configuration, the Watch and Receipt Manager)
• the call trees of POUs and data types, as well as
• the cross reference list.
For the last two items the project must have been built without errors.