Lenze PLC Designer PLC Designer (R2-x) - Manual (Page 48)

L-force | PLC Designer
What is What in PLC Designer
46 DMS 3.2 EN 02/2011 TD29

Examples for calls of the above described action from another POU:
Declaration for all examples:
PROGRAM PLC_PRG
VAR
Inst : Counter;
END_VAR
Call of action 'Reset' in another POU, which is programmed in IL:
CAL Inst.Reset(In := FALSE)
LD Inst.out
ST ERG
Call of action 'Reset' in another POU, which is programmed in ST:
Inst.Reset(In := FALSE);
Erg := Inst.out;
Call of action 'Reset' in another POU, which is programmed in FBD:
Note!
Actions play an important role in blocks in sequential function charts, see
Sequential Function Chart.
The IEC standard does not recognise actions other than actions of the sequential
function chart.